Remote Power Control

From PREX Wiki
Jump to: navigation, search

Back to Main Page >> Control GUIs Doc Portal

HRS ROC Power Strips

The tritium wiki has a page that has been updated to include information about power cycling the LHRS (ROC 25) and RHRS (ROC 26) VME Crates:

HRS DAQ Power control

See here

Main Remote Power Strips

In each HRS we have all of the important detector motion and Low Voltage controls plugged into remote power strips. These strips are managed by Jack Segal and reside in the 188 Hall A subnet.

Using the strips

To cycle power:

  • From within the Hall Gateway (inside the fence) on a JLab computer
  • Enter the I.P. address into your webbrowser
  • Enter the username and password (hacuser, standard PW)
  • Click on the Control menu -> RPDU -> Outlet
  • Check the box of the channel you would like to cycle
  • Select the action to apply to that channel from the drop down menu
  • Click "Next>>"
  • Click "Apply" in the next window

Left Arm

Left Arm Strip

  • I.P. address 129.57.188.155 -> pi@rpi4-prex (see DAQ Networking)
  • Also has 129.57.188.52 in swotch port 21
  • Username hacuser (standard hacuser PW)
  • Admin account, ask Dustin or Cameron
  • Switch port on 188 subnet: "halla-leftarm-top-sw" port 22

Right Arm

Right Arm Strip

  • I.P. address 129.57.188.156 -> pi@rpi1-prex (rhrs_motion)
  • Username hacuser (standard hacuser PW)
  • Admin account, ask Dustin or Cameron
  • Switch port on 188 subnet: "halla-rightarm-top-sw" port 24

Jack's Master List (OLD)

Master List

IOCs (help page, OPS account):

  • PDU: hareboot22 ( 129.57.243.35 ) ( Right Arm Detector Stack )
    • Outlet - Device
  1. Ethernet switch
  • iocha22 ( 129.57.242.12 ) - Arcnet interface crate for HV control, on Right Arm Detector Stack
serial port on "telnet hatsv3 2006"
"soft" reboot(backplane reset) on General Tools - Crate Resets - Resets from the Hadron Detector Stack (left) Crate - LeCroy 1458 ( high voltage )
"hard" reboot(AC power cycle) on hareboot22 outlet 3 ( will reboot iocha11 AND iocha22 )
located on the first level electronics platform on the Right Detector Stack, iocha11 and iocha22 share the same VME crate
  • Port Server : hatsv3 ( 129.57.164.67 )
    • HRSE ( Right Arm Detector Stack )
    • Port - Device
  1. configured for a terminal
  2. HRS roc1
  3. HRS TS0
  4. HRSE Upper LeCroy 1458
  5. HRSE Lower LeCroy 1458
  6. Arcnet controller VME for LeCroy high voltage(iocha22)
  7. Detector Stack A Slow Controls VME (iocha11)
  • Port Server : hatsv4 ( 129.57.164.68 )
    • HRSH ( Left Arm Detector Stack )
    • Port - Device
  1. configured for a terminal
  2. HRS roc2
  3. HRS roc3
  4. HRS TS1
  5. LeCroy high voltage mainframe
  6. HRS TS11
  • Port Server : hatsv5 ( 129.57.188.86 )
    • beamline rack 1H75B15
    • Port - Device
  1. configured for a terminal
  2. e-P 1
  3. Moller 1 (formerly hac41)
  4. Moller 2 (VME 2306 DAQ)
  5. e-P 2
  6. Compton roc1
  7. Compton roc2
  8. Compton roc3
  9. Compton roc4
  10. Compton roc5
  11. Beamline HV
  12. ARC energy
  13. HRS roc14
  14. HRS roc15

Other Notes

DVCS Wiki (describes magnet IOC reboots, etc.): https://hallaweb.jlab.org/wiki/index.php/How_to_HRS_/_DVCS#Power_cycling_Fastbus_crates

https://hallaweb.jlab.org/wiki/index.php/IOC_reboot

https://hallaweb.jlab.org/experiment/E07-006/howto.html

http://hareboot30/

Tritium Wiki