Difference between revisions of "Flipper"
From PREX Wiki
Jump to navigationJump to search| Line 4: | Line 4: | ||
**Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly. | **Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly. | ||
**Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly | **Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly | ||
| − | **Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./ | + | **Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./CheckPCvalues The output should tell you the voltages are good, otherwise call an expert. |
**if alarms go off and values don't match those in table, call an Expert | **if alarms go off and values don't match those in table, call an Expert | ||
Revision as of 18:33, 22 July 2019
- Flip IHWP state
- to flip IHWP state, will have to inform other halls of intention to flip state first. Then call MCC and ask them to flip state.
- Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly.
- Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly
- Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./CheckPCvalues The output should tell you the voltages are good, otherwise call an expert.
- if alarms go off and values don't match those in table, call an Expert
