Difference between revisions of "Scalar GUI"
From PREX Wiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| + | * This is relevant for counting mode DAQ. Not very important at all for the Production (integrating) mode. | ||
* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI | * Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI | ||
* These screens are generally already open on the '''hapc2'' machine (located above the adaq1 terminal) | * These screens are generally already open on the '''hapc2'' machine (located above the adaq1 terminal) | ||
Latest revision as of 10:35, 19 July 2019
- This is relevant for counting mode DAQ. Not very important at all for the Production (integrating) mode.
- Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI
- These screens are generally already open on the 'hapc2 machine (located above the adaq1 terminal)
- If xscaler is not open then follow these instructions:
- login as a-onl on adaq1 or adaq2 machines (eg: "ssh a-onl@adaq1" )
- passwords are written on the white board
- type "goxscaler" and follow the instructions printed on the screen
- type "./xscaler Left" or "./xscaler Right" to access xscaler display
- Select the "LHRS-Triggers" or "RHRS-Triggers" tab on the top of the window
