Remote Power Control

Back to Main Page >> Control GUIs Doc Portal

Jack's Master List

Master List

IOCs:

• PDU: hareboot22 ( 129.57.243.35 ) ( Right Arm Detector Stack )
  • Outlet - Device

2. Ethernet switch

• iocha22 ( 129.57.242.12 ) - Arcnet interface crate for HV control, on Right Arm Detector Stack

serial port on "telnet hatsv3 2006"
"soft" reboot(backplane reset) on General Tools - Crate Resets - Resets from the Hadron Detector Stack (left) Crate - LeCroy 1458 ( high voltage )
"hard" reboot(AC power cycle) on hareboot22 outlet 3 ( will reboot iocha11 AND iocha22 )
located on the first level electronics platform on the Right Detector Stack, iocha11 and iocha22 share the same VME crate

• Port Server : hatsv3 ( 129.57.164.67 )
  • HRSE ( Right Arm Detector Stack )
  • Port - Device

1. configured for a terminal
2. HRS roc1
3. HRS TS0
4. HRSE Upper LeCroy 1458
5. HRSE Lower LeCroy 1458
6. Arcnet controller VME for LeCroy high voltage(iocha22)
7. Detector Stack A Slow Controls VME (iocha11)

• Port Server : hatsv4 ( 129.57.164.68 )
  • HRSH ( Left Arm Detector Stack )
  • Port - Device

1. configured for a terminal
2. HRS roc2
3. HRS roc3
4. HRS TS1
6. LeCroy high voltage mainframe
7. HRS TS11

• Port Server : hatsv5 ( 129.57.188.86 )
  • beamline rack 1H75B15
  • Port - Device

1. configured for a terminal
2. e-P 1
3. Moller 1 (formerly hac41)
4. Moller 2 (VME 2306 DAQ)
5. e-P 2
6. Compton roc1
7. Compton roc2
8. Compton roc3
9. Compton roc4
10. Compton roc5
11. Beamline HV
13. ARC energy
14. HRS roc14
15. HRS roc15

https://hallaweb.jlab.org/wiki/index.php/How_to_HRS_/_DVCS#Power_cycling_Fastbus_crates

https://hallaweb.jlab.org/wiki/index.php/IOC_reboot

https://hallaweb.jlab.org/experiment/E07-006/howto.html

http://hareboot30/

129.57.188.155 or 156, hacuser, etc.