Remote Power Control

Back to Main Page >> Control GUIs Doc Portal

Jack's Master List

Master List

IOCs (help page, OPS account):

• PDU: hareboot22 ( 129.57.243.35 ) ( Right Arm Detector Stack )
  • Outlet - Device

2. Ethernet switch

• iocha22 ( 129.57.242.12 ) - Arcnet interface crate for HV control, on Right Arm Detector Stack

serial port on "telnet hatsv3 2006"
"soft" reboot(backplane reset) on General Tools - Crate Resets - Resets from the Hadron Detector Stack (left) Crate - LeCroy 1458 ( high voltage )
"hard" reboot(AC power cycle) on hareboot22 outlet 3 ( will reboot iocha11 AND iocha22 )
located on the first level electronics platform on the Right Detector Stack, iocha11 and iocha22 share the same VME crate

• Port Server : hatsv3 ( 129.57.164.67 )
  • HRSE ( Right Arm Detector Stack )
  • Port - Device

1. configured for a terminal
2. HRS roc1
3. HRS TS0
4. HRSE Upper LeCroy 1458
5. HRSE Lower LeCroy 1458
6. Arcnet controller VME for LeCroy high voltage(iocha22)
7. Detector Stack A Slow Controls VME (iocha11)

• Port Server : hatsv4 ( 129.57.164.68 )
  • HRSH ( Left Arm Detector Stack )
  • Port - Device

1. configured for a terminal
2. HRS roc2
3. HRS roc3
4. HRS TS1
6. LeCroy high voltage mainframe
7. HRS TS11

• Port Server : hatsv5 ( 129.57.188.86 )
  • beamline rack 1H75B15
  • Port - Device

1. configured for a terminal
2. e-P 1
3. Moller 1 (formerly hac41)
4. Moller 2 (VME 2306 DAQ)
5. e-P 2
6. Compton roc1
7. Compton roc2
8. Compton roc3
9. Compton roc4
10. Compton roc5
11. Beamline HV
13. ARC energy
14. HRS roc14
15. HRS roc15

DVCS Wiki (describes magnet IOC reboots, etc.): https://hallaweb.jlab.org/wiki/index.php/How_to_HRS_/_DVCS#Power_cycling_Fastbus_crates

https://hallaweb.jlab.org/wiki/index.php/IOC_reboot

https://hallaweb.jlab.org/experiment/E07-006/howto.html

http://hareboot30/

129.57.188.155 or 156, hacuser, etc.