Difference between revisions of "Flipper"
From PREX Wiki
Jump to navigationJump to search (Created page with " *Flip IHWP state **to flip IHWP state, call MCC and ask them to flip state. Will have to inform other halls of intention to flip state **then (after IHWP is in new desired st...") |
|||
| Line 1: | Line 1: | ||
*Flip IHWP state | *Flip IHWP state | ||
| − | **to flip IHWP state, call MCC and ask them to flip state. | + | **to flip IHWP state, will have to inform other halls of intention to flip state first. Then call MCC and ask them to flip state. |
| − | ** | + | **Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly. |
| − | **if alarms go off and values don't match those in table, | + | **Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly |
| − | + | **Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./FlipPCValuesCheck. The output should tell you the voltages are good, otherwise call an expert. | |
| + | **if alarms go off and values don't match those in table, call an Expert | ||
Revision as of 13:04, 21 July 2019
- Flip IHWP state
- to flip IHWP state, will have to inform other halls of intention to flip state first. Then call MCC and ask them to flip state.
- Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly.
- Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly
- Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./FlipPCValuesCheck. The output should tell you the voltages are good, otherwise call an expert.
- if alarms go off and values don't match those in table, call an Expert
