Scalar GUI

From PREX Wiki
Revision as of 10:35, 19 July 2019 by Rom (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
  • This is relevant for counting mode DAQ. Not very important at all for the Production (integrating) mode.
  • Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI
  • These screens are generally already open on the 'hapc2 machine (located above the adaq1 terminal)
  • If xscaler is not open then follow these instructions:
    • login as a-onl on adaq1 or adaq2 machines (eg: "ssh a-onl@adaq1" )
    • passwords are written on the white board
    • type "goxscaler" and follow the instructions printed on the screen
    • type "./xscaler Left" or "./xscaler Right" to access xscaler display
    • Select the "LHRS-Triggers" or "RHRS-Triggers" tab on the top of the window
Retrieved from "https://prex.jlab.org/wiki/index.php?title=Scalar_GUI&oldid=7252"