DAQ Commissioning Notes

Further information is available in DAQ Documentation Portal and DAQ Testing Portal, see also the Run List

Summer 2018 Resurrection

See the DAQ Meeting List, in particular May, June and July 2018 notes from Cameron and Chandan's visit with Bob, for details on efforts to resurrect the Parity DAQ system and run everything under Trigger Supervisor (TS) control.

Summer 2018 Recommissioning

Cameron and Chandan returned to JLab in late July 2018 to work with Bob on testing all ADC channels and other hardware and software, to ensure dynamic range and functionality, as well as updating things and maintaining usability for all interested parties.

Testing ADC Channels

Automating Testing/Analysis Software

Notes on specific module testing

See also - DAQ Hardware

DAQ Testing - July 27th, 2018
DAQ Testing - July 28th, 2018
DAQ Testing - July 29th, 2018
DAQ Testing - July 30th, 2018
DAQ Testing - July 31st, 2018
DAQ Testing - August 1st, 2018
DAQ Testing - August 2nd, 2018
DAQ Testing - August 3rd, 2018
DAQ Testing - September 10th, 2018
DAQ Testing - November 1st, 2018
DAQ Testing - November 2nd, 2018 - Reading out scalers with EPICs server - ET deadtime tests - some timing diagram notes
DAQ Testing - November 5th, 2018 - ET deadtime tests - Carl Timmer suggests monitorGui
DAQ Testing - November 6th, 2018
DAQ Testing - November 11th, 2018
DAQ Testing - November 14th, 2018
DAQ Testing - November 21st, 2018 - High Current Beam Test (MCC initiated)
DAQ Testing - November 27th, 2018 - Testing injector timing
DAQ Testing - November 28th, 2018 - Analyzing 27th's injector data
DAQ Testing - December 2nd, 2018 - Follow-up injector timing tests
DAQ Testing - December 3rd, 2018 - ET deadtime tests
DAQ Testing - December 5th, 2018 - ET deadtime tests
DAQ Testing - December 17th, 2018 - Conclusive ET deadtime tests
DAQ Testing - December 19th, 2018 - Injector Banked CRL timing tests, BMW recommissioning in counting house
DAQ Testing - December 21st, 2018 - Verify fiber optic cables for TS control are correct, SIS3801 in RHRS replace and test
DAQ Testing - January 15th, 2019 - Notes from January up to 15th, crate sync tests and scaler updates
DAQ Testing - January 18th, 2019 - Updating Japan to have the full detector map, and battery pedestal studies
DAQ Testing - January 22nd, 2019 - Updating CH synch test to use JAPAN and vetoed logic modules
DAQ Testing - January 23rd, 2019 - BMW testing FLEXIO and testing Online JAPAN ET connection
DAQ Testing - February 4th, 2019 - DAQ exercising and SAM noise floor testing, Cavity BCMs update
DAQ Testing - February 5th, 2019 - Working on getting the DAQ ready for APEX running
DAQ Testing - February 6th, 2019 - Continuing
DAQ Testing - February 7th, 2019 - Initialize TEDf 1546 test stand, getting helboard and HAPTB work started
TEDf-VQWK-Testing - TEDf test stand summary page for module testing
DAQ Testing - February 12th, 2019 - Helicity Control Board curiosities - new firmware is imperfect
DAQ Testing - February 13th, 2019 - Helboard ctd. ADC testing
DAQ Testing - March 22nd, 2019 - Online Japan Speed Limit
DAQ Testing - April 4th, 2019 - Documenting Parity DAQ from APEX running
DAQ Testing - April 29th, 2019 - Putting DAQ together for Summer running
DAQ Testing - April 30th, 2019 - Getting batteries in place and new prminput maps
DAQ Testing - May 1st, 2019 - Getting scripts ready and planning timing change
DAQ Testing - May 2nd, 2019 - Stockpile spares and add Hall C bcms
DAQ Testing - May 4th, 2019 - Spare STR 7200, INJ HAPTB
DAQ Testing - May 8th, 2019 - Planning detector noise/pickup studies for following weeks
DAQ Testing - May 23rd, 2019 - Testing new timing scheme and optimizing ADC integration placement
DAQ Testing - June 3rd, 2019
DAQ Testing - June 18th, 2019 - finalizing DAQ timing for 4 proposed modes
DAQ Testing - June 28th, 2019 - Raster calibration
DAQ Testing - June 30th, 2019 - running the parity DAQ with Lead to see Main detectors pickup the helicity flip
DAQ Testing - July 14th, 2019 - DAQ TS issues, skipping events and eventual HRS DAQ adding helicity and TS replacement
DAQ Testing - July 29th, 2019 - Testing with tune beam - DAQ bandwidth
DAQ Testing - August 7th, 2019 - 240 Hz update, fixing /tmp/ overflow, and raster synch update for 240 Hz (primary goal is to get raster to work properly)

DAQ Commissioning Notes

Contents

Summer 2018 Resurrection

Summer 2018 Recommissioning

Testing ADC Channels

Automating Testing/Analysis Software

Notes on specific module testing

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools