WAC Notes January 8 2020
| Documentation |
| HOW TOs for shift crew |
| Expert Tools |
| All Expert Contacts |
PREX Main << Weekly Analysis Coordinator << WAC Notes CREX << Instructions
WAC Notes December 15 2019 << >> WAC Notes January 11 2020
January 8 2020
Daily Meeting BlueJeans
Production Run List - Slug 105 - IHWP IN - Flip-RIGHT - Production
- Good - Run 5576 - Ca48 150uA - About 1 minirun worth of OK beam. A run all by itself in slug 105. cuts from 220-240k to remove an excursion
Production Run List - Slug 106 - IHWP OUT - Flip-RIGHT - Production
- Good - Run 5581 - Needed a cut for a beam moving at the beginning, and for clipping towards the end
- Good - Run 5582
- Good - Run 5583
- Good - Run 5613 - First run back from Compton tuning, with BMW testing in it - Cut beam excursions at 0-30k, 80-220k - Large Aq RMS, due to Injector problems. Fixed later by Ops
- Good - Run 5616 - Good
- Good - Run 5619 - Short, bad Aq Feedback, OK
- Good - Run 5620 - Short, bad Aq Feedback, OK
Non-Production Runs and Bad Runs
- Short - Run 5614 - completely trippy beam with some 125 uA data included at the end. 1/4 of a normal minirun size, and the Aq is at 11ppm which is slightly greater than the 1 sigma limit, BAD
- Short - Run 5617 - bad Aq
Pedestal/Calibrations Updates
- https://docs.google.com/spreadsheets/d/1mt39fCuIW3Pr8TO7fzhtFjmMFt4Op30jMm5wMQke6Xo/edit?usp=sharing
- Run 5618 - PITA Scan
Issues
- Slug 104 has FFB turn on mid way through the slug - this makes the optics/energy in the HRS more comfortable and stable
- SAM 7 is updated and ATs are moved at the end of slug 103 and ATs are moved at the end of slug 104, so these are bifurcations
- Fixed the prompt summary to report correct number of patterns: https://logbooks.jlab.org/entry/3753878
- 12X energy shifting
- Dispersion in the arc is measured as 0.4 MeV/mm
- Dispersion in the HRS is 6.2 mm/MeV
- Dithering does a 0.5 mm p2p fluctuation in 12 X -> 1.25 mm shift in the HRS Quartz
- Normal running without FFB does 1 mm p2p fluctuations (over hour time scale) -> 2.5 mm shift in the HRS quartz
- 5477.0 has a significant problem in JAPAN
- Long vs. short bursts will require JAPAN rNd from Paul, etc.
- The AT combos of interest are Ldd avg Rdd (for vertical transverse), Indd avg Outdd (most important for horizontal transverse), and dd's therein
BCMs
- Run 5474 is a current ramp for calibrating BCM Cav 4CQ, AT Rs, and SAM 7
Target/Energy Tolerances
Commissioning
Pedestals and Calibrations (respin first 4 slugs)
https://docs.google.com/spreadsheets/d/1mt39fCuIW3Pr8TO7fzhtFjmMFt4Op30jMm5wMQke6Xo/edit#gid=0
- Run 5410 - Unser calibration - 5396->5420 - https://logbooks.jlab.org/entry/3753060
- Run 5417 - SAM calibration - 5410->5420 - https://logbooks.jlab.org/entry/3753970
- Run 5433 - BPMs calibration - 5410-> - https://logbooks.jlab.org/entry/3753602
- Run 5436 - SAM and Main Dets - 5421->5473 - https://logbooks.jlab.org/entry/3753968
- Run 5434 - Unser calibration - 5421-> - https://logbooks.jlab.org/entry/3753564
- Run 5474 - Main dets and SAMs - 5474-> - https://logbooks.jlab.org/entry/3753933
Committed: https://github.com/JeffersonLab/japan/commit/ddb956334b38acb124f67b1e841b5a02c761cc97
Other Status Updates
BMOD Ana
note regarding beammod analysis:
Running the BeamMod analysis for a single run.
From ~/PREX/prompt/bmodAna/ create a new beammod root file from the already prompted run (####) using command root -l -b -q bmodAna.C'(####,"max_input.list")'
then, to plot all combinations of alphas, deltas,and alpha/delta use the common root -l -b -q plotAD.C'("path/to/rootfile/created/by/the/previous/command.root")
