Podd Analyzer

First, here is a good general reference for Podd

https://redmine.jlab.org/projects/podd/wiki

Specific information for analyzing PREX HRS counting-mode data is here. The purpose of these analyses are for Optics, measuring Qsq, and background studies.

Instructions on running the Podd analyzer
This file: /adaqfs/home/a-onl/happexsp/prex/README

maintained by R. Michaels, Ye Tian, Chandan Ghosh.  Updated Jun 19, 2019

I. Set up
==========

Type "goprex" on a-onl account on aonl1 or aonl2 to go to the
working directory and set the environment.

We're using the ''official'' (Ole's) analyzer at the moment, but 
with the ParityData class plugin.  

The database is $DB_DIR = ./DB which is a link.  e.g. a link to 
PREXI or PREXII databases.   PREXI is there for test purposes,
while DB_PREXII is linked to DB, which is the current database. 

Our detectors are defined in db_P.dat in the $DB_DIR.
Which variables are written to the root output are defined
in output.def

Input data files are located in the directory:
/adaq1/data1/
prexLHRS_*.dat.* for LHRS run
prexRHRS_*.dat.* for RHRS run

Important files for Podd:

db_run.dat -- defines kinematics
db_cratemap.dat -- cratemap.  aprexII map 
onlana.cuts -- cuts file, see Podd documentation
output.def -- output definition, see Podd documentation
rootlogon.C -- loads the libParity_*.so, since the flashadc 
located in different crates, slots for both arms, so we have two libParity_*.so files
for analyzing the data. 
if we want to analyze the LHRS run, we need to load 
 gSystem->Load("../ParityData/libParity_LHRS.so");
if we want to analyze the RHRS run, we need to load
 gSystem->Load("../ParityData/libParity_RHRS.so");

setup.C -- sets up the analyzer (see example below)
show*.C -- various macro examples. (showRight/Leftfadc.C s)
bob.txt -- debug output.  May want to turn off debugging

/***********************************************************************************************/

II. Running the analyzer, type "analyzer"

[a-onl@aonl1]$ goprex
[a-onl@aonl1 prex]$ pwd
/adaqfs/home/a-onl/happexsp/prex
[a-onl@aonl1 prex]$ vi rootlogon.C  (gSystem->Load("../ParityData/libParity_LHRS.so"); for LHRS
                                     gSystem->Load("../ParityData/libParity_LHRS.so"); for RHRS) 

[a-onl@aonl1 prex]$ analyzer
  ************************************************
  *                                              *
  *            W E L C O M E  to  the            *
  *       H A L L A   C++  A N A L Y Z E R       *
  *                                              *
  *  Release            1.6.6        Apr 25 2019 *
  *  Based on ROOT  6.16/00          Jan 23 2019 *
  *                                              *
  *            For information visit             *
  *        http://hallaweb.jlab.org/podd/        *
  *                                              *
  ************************************************
analyzer [0] .x setup.C(runnumber)  //you need to change the nsplit number to handle more than one split file. prexLHRS_runnumber.dat.0, 1, 2......  
analyzer [1] .x show*.C (analysis scripts. 
"showLeftfadc.C" plots fastbus ADC, fastbus TDC,flash ADC, time-over-threshold of flash ADC distributions for all detectors, VDC hit wires and VDC raw time, and S0 and VDC correlation ) 

***prexRHRS/LHRS_*.root -- the root output. They are located in the directory: /chafs1/work1/prex_counting/  

III. Analysis Scripts

A work in progress !

Some scripts which may be useful are in ./macros

detL1.C  detR1.C  showLeftfadc.C    showQsqLeft.C    showRightS0.C      showSieveRight.C
detL2.C  detR2.C  showLeftS0.C      showQsqRight.C   showRightscaler.C  showVarsLeft.C
detL3.C  detR3.C  showLeftscaler.C  showRightfadc.C  showSieveLeft.C    showVarsRight.C

the "det" scripts are to show detectors.  this needs to be done first.
the "Sieve" scripts are for showing sieve slit patterns.  This probably needs some work.
the "scaler" scripts are for looking at scalers.

Some more info, like how to re-analyze PREX-I data (circa 2010) or how to analyze scalers is in the file README_old in the working directory ("goprex")