WAC Notes July 18 2019

Documentation

HOW TOs for shift crew

Expert Tools

All Expert Contacts

PREX Main << Weekly Analysis Coordinator << Instructions

WAC Notes July 17 2019 << >> WAC Notes July 19 2019

July 18 2019 all 3 Shifts

Slug 5: 70 uA production

Data was recovered from 3424, 3429, and 3430 current ramp runs with better beam current lower limit cut

• Good: 3424
• Good: 3425
• Good: 3426
• Good: 3427
• Good: 3428
• Good: 3429
• Good: 3430

Slug 6: 50 uA Production

Lots of production, only 1 major problem (lost run 3533 with 9k muls due to blinder fail from EPICs fastlogger and Compton IOC)

• Good: 3434
• Good: 3435
• Good: 3436
• Good: 3437
• Good: 3438
• Good: 3439
• Good: 3440
• Good: 3441
• Good: 3442
• Good: 3443

Slug 7: 50 uA Production

• Good: 3444
• Good: 3445
• Good: 3446 - double difference in BCM returns with vengence
• Good: 3447
• ???: 3449
• BPMs moving, needs cuts: 3450
• ???: 3451
• ???: 3452
• Good: 3453
• Good: 3454
• Good: 3455 - RQ2 tripped off

Non-Production Runs and Bad Runs

• Died (blinder needs fixing): [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3433_000/run3433_000_all.pdf 3433
• Some PQB Calibration: 3448 - too short and noisy, and already labelled as calibration.
• RQ2 dead and PQB commences at low current:
  • 3456
  • 3457
  • 3458
  • 3459
  • 3460

Pedestal/Calibrations Updates

In order to salvage current ramps and trips on large chunks of data and save time/save the regression/pedestal usefulness:

• Change the lower limit current cut to be nominal-15 uA (35 for 50 uA, 55 for 70 uA)
• Updating the event cuts to have nominal-15 uA beam current lower cut Starting at run 3456 (now) and also setting specifically for 3 70 uA current ramp runs 3424, 3429, 3430 (suspect Aq, but worth a try)
  • 50 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.3456-.map (pending beam...)
    • 3451:
    • 3452:
    • 3453: Fixed
  • 70 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.[3424,3429,3430].map
  • Follow up - cut on current at nominal - 15 uA -> applied to current ramp runs
    • 3424: Cuts out half the prior data... marginal improvements
    • 3429: No effect on anything (since the beam was always at 60-70 anyway)
    • 3430: Cuts out 2/3rds of the prior passing data - fixes regression!

Other Status Updates

PQB runs need analyzing - see notes