Detailed Calibration plan

Beamline instrumentation calibration

1. Check the following has been performed
   • No target.
   • 50uA-70uA beam current, through Compton (backgrounds on fingers and Compton photon detector).
   • Establish 4x4 raster. Insert lead target.
   • Detector and SAM voltages (Dustin M)

1. Beamline instrumentation calibration 0.5 shift Caryn P,
   1. Current ramp for BPM/BCM calibrations and detector pedestals detailed plan
2. Initial production condition test 0.25 shift Caryn P,
   1. detector and SAM widths
   2. regression sensitivities
   3. beam noise and asymmetry check
   4. collimator water and thermocouple temperatures,
   5. radiation monitors and ion chamber stability
3. Width studies 0.5 shift KK,
   1. detector and SAM widths, targets, shutters, etc
   2. deinstall shutters at conclusion of test