WAC Notes July 17 2019

From PREX Wiki
Jump to navigationJump to search
Documentation
HOW TOs for shift crew
Expert Tools
All Expert Contacts

In the process of editing and updating this page. Please contact Juliette Mammei crowder@jlab.org with questions or suggestions.

PREX Main << Weekly Analysis Coordinator << Instructions

July 17 2019

  • WAC = Cameron Clarke
  • Slug 3
  • Beam Status
    • OWL had ~7 hours of beam, with some sketchy BPM noise and clear BCM DD problems
  • Major issue: BCM Upstairs Black box noise on AN_US

Production Run List (status at 6pm 7/17/2019)

Non-Production Runs and Bad Runs

Pedestal/Calibrations Updates

  • Tao's Pedestal Update
    • Using: prexCH_beamline_pedestal.3396.map for 50uA runs from slug 3 onward - new BPMs in ARC need attention
    • Using: prexCH_beamline_pedestal.3395.map - use it as a template pedestal map for 70 uA runs.
    • I've taken prexCH_beamline_pedestal.3396.map and placed it in the prexCH_beamline_pedestal.3390-.map
  • Caryn's Hall C and cav4cQ pedestals (3373 and 3378 respectively)

Issues

  • Tuning 3397 - HALOG
  • Charge Feedback glitch: non-fatal QW Feedback process fighting with Analysis Minder - HALOG, HALOG
  • OPS FFB on: for a few minutes of run 3398 - HALOG
  • Strange beam motion at beginning of 3398 - HALOG
  • BCM Noise/phase lag question: Begins run 3400, varies, investigated on scope, looks like BCM black box issue - HALOG, Sakib noted, Victoria noted
    • Looked at on a scope with Tune Beam and changing all cables isolates it to a electronics/hardware issue in the Upstairs black box, not downstairs.
    • This will need to be fixed, but probably the data is fine.
  • BPMs have strange noise, especially 4eY: Beings run 3399 - HALOG
  • Compliment BPMs don't have this noise (anecdotal), and their DDs w.r.t. normal BPMs is noticeable - HALOG, HALOG 2
  • At Left 1 is - w.r.t. At Left 2, and this isn't mirrored in Right - Devi says this is beam related, and HVs were off...
  • Main Detectors R vs. L correlations shift in time? -> Kent says this is normal and has to do with beam motion sensitivity - HALOG
  • LHRS Dipole moved a bit - HALOG, [1]

Other Status Updates

  • Beam Mod is OK - HALOG
  • Aq is working, nothing more than ~0.2 ppm mean charge asymmetry over a given run, many sub 0.02 ppm - See Online Plots
  • SAM pedestals made SAM 8 look like a negative signal, was spurious, Devi is fine with it