BMOD 18Aug2021

From PREX Wiki
Revision as of 15:03, 18 August 2021 by Cameronc (Talk | contribs) (August 18)

Jump to: navigation, search

BMOD_11Aug2021 << >> BMOD_25Aug2021

Logistic information

 BlueJeans calling instructions:
 Toll-Free Number (U.S.&  Canada):  888-240-2560
 International toll number:         408-740-7256
 Bluejeans CODE:                 948942477
 Bluejeans link:


August 18

Summary Respin2 webpage

July 21

Looking at results from respin 2 data:

  • dit - reg - lagr differences
  • impact of including error bars on lagrange sensitivities
  • slope plots
  • slope differences per monitor from different techniques (dit vs reg)
  • accumulated residuals (or, residual spread per slug RMS and averages)
  • net beam corrections (3 parts and slugwise)

Tasks for next week:

  • Try to zoom in on the parts where plain and eigen dit corrected asyms disagree
    • Double check the root files and slopes, etc. that there is nothing wrong in the analysis chain
    • The two methods should get identical corrected asyms
    • Verify no 1 arm running shenanigans or mislabeled data slipped in (and that run_avg == eigen_dit_run_avg_part_avgd)
  • Look at where slopes disagree between dit - reg
    • Verify the corrections and/or monitorwise diff RMSs are small (so that if the slopes disagree it has negligible effect on the corrections being made)
    • Make slug_avg plots of the slope disagreements (including RMSs)
    • Make slug_avg plots of the corrections per monitor too
  • Do a 12BPM Eigen Reg and Eigen Lagr comparison
    • See if the slopes agree better than the 5BPM case (where evMons 3 and 4 disagreed substantially between reg and dit)
  • Provide easy to parse tables of the 5 evMon's corrections per 3 CREX parts (and make the error calculation math clear as well)
  • Improve dit-reg-lagr plots
    • Add pull plots
    • Do slug averaging of these (including RMSs)
  • Multipletwise and runwise diff plots being == is suspicious
    • Double check the plotting script isn't doing anything funny
    • Double check the source aggregator root file and input device list are correct
    • Double check the math by plotting the distributions by hand for some example runs

July 14

  • Respin 2 outputs
  • Updated eigenvector definitions
  • Dit + reg + lagrange using eigenvectors
  • Residual sensitivities, done correctly this time

May 19

  • Respin 2: Look at dit vs. reg differences - HAPLOG
    • Look at respin2 dit-reg diff outputs
    • Checked by eye the 4+ sigma outlier miniruns
  • Respin 1: 3 CREX parts’ monitorwise net corrections (and uncertainties?) - HAPLOG
  • Respin 1: Residual dithering sensitivities - HAPLOG
    • Looking at plain BPMs, run_avg sensitivities
    • Looking at eigenvector monitors, run_avg sensitivities
    • Looking at plain BPMs, cyclewise sensitivities
    • Fractional residuals (needs more work in respin2 outputs to clean up outliers) - HAPLOG
  • Timescale dependent RMSs in asym->histogram filling - not discussed - HAPLOG