DAQ Meeting/20180803

From PREX Wiki
Revision as of 13:52, 3 August 2018 by Cameronc (Talk | contribs)

Jump to: navigation, search

Back to Main Page >> DAQ Documentation Portal >> DAQ Meetings

previous meeting << >> following meeting

Logistic information

BlueJeans calling instructions:
Toll-Free Number (U.S.& Canada): 888-240-2560
International toll number:     408-740-7256
Bluejeans CODE:         475 839 391
Bluejeans link: https://bluejeans.com/475839391

Agenda

  • Bob :
  • Ciprian : revive panguin and other online analysis features

Minutes

  • Online Analysis
    • Last known working Panguin and Pan duo
      • Live in apar@adaq3~/PREX/pan/ and pan/panguin/
      • online.c and online.h is the online monitor
      • int main is the main program which creates a root TApp and creates pages based on a config file given as a command line argument
      • config file example: prex.cfg
    • Functioning Japan lives in ~apar/ciprian/japan/ and in ~a-onl/pking/japan
      • ~/ciprian/japan/Parity/prminput/prexin.conf is the functioning configuration for the injector that is being used right now
        • Looks at a .map file to map out the detectors in the .crl similar to old PAN control.db
        • There are multiple files now that contain different segments, for modularity
        • Label names in the .map file come out as the branch names in the JAPAN output
      • Then you get a MPS_tree (MPS = one pulse per event, see Meeting notes
        • A lot of the variables currently placed into the JAPAN output files are not necessary for online analysis purposes
      • PANGUIN functionality is to put the root file directly into RAM memory
        • So we should use a truncated output root file to speed up online data lookup - trimmed down analysis outputs exist
      • Startrun script ~/scripts/startAnalyzer_prex is required to run the online analysis (paired down version of regular analysis - runs fast and gives lots of updates)
        • ~/PREX/feedback/panFFB is the fast feedback code - this script reads last N events from the ET directly (rather than the memory resident root file), so it is susceptible to hanging - this feeds data into PANGUIN for online plotting - fast event rates will be a problem and needs to be updated (wont work for MOLLER unless paralleled to death with GPUs etc.)
          • These fast feedback executables will sometimes choose to block the ET whenever sequential events are unable to be read
          • This is so that you can make accurate helicity correlated beam corrections, etc. and not get back results due to pileup
          • We absolutely need to turn it off during production online analysis
          • There is a control.db for fast feedback that you can set to change beam, etc. parameters so that you can study beam quality, etc. in your raw data output
        • Prompt analysis is another analysis which is done automatically at the end of a run and reads the data written to disk (adaqfs)
        • WAC analysis is a third type of analysis is some sort of corrective post-analysis done by hand by Weekly Analysis Coordinators (WAC)


Testing

Today's testing