Difference between revisions of "Flipper"

From PREX Wiki
Jump to: navigation, search
(Created page with " *Flip IHWP state **to flip IHWP state, call MCC and ask them to flip state. Will have to inform other halls of intention to flip state **then (after IHWP is in new desired st...")
 
Line 1: Line 1:
  
 
*Flip IHWP state
 
*Flip IHWP state
**to flip IHWP state, call MCC and ask them to flip state. Will have to inform other halls of intention to flip state
+
**to flip IHWP state, will have to inform other halls of intention to flip state first. Then call MCC and ask them to flip state.
**then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues
+
**Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly.
**if alarms go off and values don't match those in table, set values by hand
+
**Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly
** to set values by hand, ask MCC for channel access to iocsoftmdaq and iocin6, then pull up parity and RTP screens and set values as shown in the table and the figures
+
**Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./FlipPCValuesCheck. The output should tell you the voltages are good, otherwise call an expert.
 +
**if alarms go off and values don't match those in table, call an Expert

Revision as of 13:04, 21 July 2019

  • Flip IHWP state
    • to flip IHWP state, will have to inform other halls of intention to flip state first. Then call MCC and ask them to flip state.
    • Note: After the IHWP state has been changed, the parity alarms will go off until the voltages are set correctly.
    • Then (after IHWP is in new desired state), on apar@adaq2, in ~/feedback2019, run ./FlipPCValues to set the voltages correctly
    • Double check voltages are correct: on apar@adaq2, in /feedback2019, run ./FlipPCValuesCheck. The output should tell you the voltages are good, otherwise call an expert.
    • if alarms go off and values don't match those in table, call an Expert