GoToCavityLock

From PREX Wiki
Revision as of 10:56, 28 July 2019 by Kent Paschke (Talk | contribs) (Created page with "If target is in place, turn off scintillator and VDC voltages before putting 1uA current on target to avoid damaging detectors. # Prepare: bring up the BPMPanels stripchart s...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

If target is in place, turn off scintillator and VDC voltages before putting 1uA current on target to avoid damaging detectors.

  1. Prepare: bring up the BPMPanels stripchart so we can see cavity (Cav 4B and 4D) and stripline (4A and 4E) X and Y position readbacks. (The cavity readbacks are meaningless at high currents)
  2. Establish 1 uA beam using the slow target lock to hold the position at nominal (recorded on the whiteboard)
  3. Record the cavity positions.

< to be completed>