RunPlanDaily CREX
From PREX Wiki
CREX Main << Run Coordinator Tools
Current Daily Run Plans
The current day is indicated by a color.
| Day, Date | Shift | Tasks (Responsible Party) | Comments/Status |
|---|---|---|---|
| Sat Aug 8 | Owl | waiting for beam.. | |
| Day | Waiting for beam | ||
| Swing | Harp scans on 4A and 4B, estimate size at target. If size at target is greater than 100um x100 um, then good to go. Otherwise ask MCC to tune. insert warm C-hole tgt, Request position locks (BPM 4A and 4B) from the white board. Take spot run, analyse and see the C-hole on spectra. Move beam to get C-hole properly. With the proper target center, determine raster currents for 2mmx2mm and 4mmx4mm raster size. When C-hole center and raster current are found, call RC for starting Optics data taking. | checked beam spot size from Harp scan - 143um(x)x209um(y). Good enough for our requirement. | |
| Sun Aug 9 | Owl | ||
| Day | Optics commissioning - https://docs.google.com/spreadsheets/d/1SngpqgLLULtcuKD0t9k-A2Cpmxy1jb5bIYnnP8f8zPM/edit#gid=1910123414 | ||
| Swing | Continue optics data taking. We are planning to skip +1 dp scan completely. After completing -1%dp scan, we will go to the nominal magnet settings and take watercell data for very high statistics (~10M) for (-0.3,-1.5) BPM A and E positions. After that we will request for an access to take out sieve. Then we will take sieve out C target (with and without raster -1M events) and watercell data 10M events for the above BPM positions. Then we will do detector alignment with VDC and GEMs. Finally Qsq measurements. If we are left with time after completing all above steps, then we may go to +1%dp scan or bulleye scan based on how much time available before MCC pushes for higher current. | ||
| Mon Aug 10 | Owl | Continue plan from yesterday's swing | |
| Day | |||
| Swing | |||
| Tue Aug 11 | Owl | ||
| Day | |||
| Swing | |||
| Wed Aug 12 | Owl | ||
| Day | |||
| Swing | |||
| Thr Aug 13 | Owl | ||
| Day | |||
| Swing | |||
| Fri Aug 14 | Owl | ||
| Day | |||
| Swing |
Instructions for RC
- Let the day shift know what to do while you attend the MCC meeting
- Copy the daily run plans for the previous week to the Run plan history CREX
- Copy the Run Plan Template table to this page and change the dates
- Update the plan above (if necessary) after the MCC meeting
