Difference between revisions of "Scalar GUI"

From PREX Wiki
Jump to: navigation, search
(Created page with "* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI * These screens are generally already open...")
 
Line 1: Line 1:
 
* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI
 
* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI
* These screens are generally already open on the '''agen5''' machine (above the DAQ machine)
+
* These screens are generally already open on the '''hapc2'' machine (located above the adaq1 terminal)
  
* If it is xscaler is not open then follow these instructions:  
+
* If xscaler is not open then follow these instructions:  
 
** login as '''a-onl''' on '''adaq1''' or '''adaq2''' machines (eg: "'''ssh a-onl@adaq1'''" )
 
** login as '''a-onl''' on '''adaq1''' or '''adaq2''' machines (eg: "'''ssh a-onl@adaq1'''" )
 
** passwords are written on the white board
 
** passwords are written on the white board
 
** type "'''goxscaler'''" and follow the instructions printed on the screen
 
** type "'''goxscaler'''" and follow the instructions printed on the screen
 
** type "'''./xscaler Left'''" or "'''./xscaler Right'''" to access xscaler display
 
** type "'''./xscaler Left'''" or "'''./xscaler Right'''" to access xscaler display
** Select the '''"Trig-Cher-S0"''' tab on the top of the window
+
** Select the '''"LHRS-Triggers"''' or '''"RHRS-Triggers"''' tab on the top of the window

Revision as of 10:34, 19 July 2019

  • Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI
  • These screens are generally already open on the 'hapc2 machine (located above the adaq1 terminal)
  • If xscaler is not open then follow these instructions:
    • login as a-onl on adaq1 or adaq2 machines (eg: "ssh a-onl@adaq1" )
    • passwords are written on the white board
    • type "goxscaler" and follow the instructions printed on the screen
    • type "./xscaler Left" or "./xscaler Right" to access xscaler display
    • Select the "LHRS-Triggers" or "RHRS-Triggers" tab on the top of the window