Difference between revisions of "Scalar GUI"

From PREX Wiki
Jump to: navigation, search
 
Line 1: Line 1:
 +
* This is relevant for counting mode DAQ.  Not very important at all for the Production (integrating) mode.
 
* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI
 
* Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening '''"xscaler"''' GUI
 
* These screens are generally already open on the '''hapc2'' machine (located above the adaq1 terminal)
 
* These screens are generally already open on the '''hapc2'' machine (located above the adaq1 terminal)

Latest revision as of 10:35, 19 July 2019

  • This is relevant for counting mode DAQ. Not very important at all for the Production (integrating) mode.
  • Raw rates of trigger and detector channels can be accessed using a GUI. Below are the instructions for opening "xscaler" GUI
  • These screens are generally already open on the 'hapc2 machine (located above the adaq1 terminal)
  • If xscaler is not open then follow these instructions:
    • login as a-onl on adaq1 or adaq2 machines (eg: "ssh a-onl@adaq1" )
    • passwords are written on the white board
    • type "goxscaler" and follow the instructions printed on the screen
    • type "./xscaler Left" or "./xscaler Right" to access xscaler display
    • Select the "LHRS-Triggers" or "RHRS-Triggers" tab on the top of the window