Setting up Postpan

From PREX Wiki
Revision as of 20:06, 22 July 2019 by Catherinef (Talk | contribs)

Jump to: navigation, search

Following these steps will allow you to use existing 'pass1' japan output root files to perform regression using postpan. If you want to run postpan's ./prompt , you will need your own working local version of japan, and some of the instructions below will change as well.

Getting Started

  1. Login to the apar account on aonl1: ssh apar@aonl1
  2. Create a directory for output file storage
    • Making your own folder is important, otherwise whatever you change in your directory will be changed in main prex-prompt.
    • Right now, aonl2 has space.
    • mkdir /aonl2/work1/my_directory
  3. Create a directory for the code
    1. Go to your own personal apar directory. If you don't have one, make one.
      • e.g. if your directory name is my_directory, then cd ~/my_directory
    2. Make a new folder inside your directory
      • mkdir prompt
  4. Clone the code from github
  5. Set the environment to use ROOT version 6
    • Create a file called reset_env.csh in the new prex-prompt folder. Copy and paste the following code into it:
setenv PATH `echo $PATH | sed 's/:/\n/g' | grep -v "4.34.36" |grep -v ROOT | awk 'NR==1{printf"%s",$1}; NR>1{printf":%s",$1}'`
setenv LD_LIBRARY_PATH `echo $LD_LIBRARY_PATH | sed 's/:/\n/g' | grep -v "5.34.36" | grep -v ROOT | awk 'NR==1{printf"%s",$1}; NR>1{printf":%s",$1}'`
setenv ROOTSYS /adaqfs/apps/ROOT/6.14-04 <\code>

Setting up for analysis

Currently, ther version of prex-prompt that you pull from github is missing files. There are also many symbolic links that need to be changed. Right now, the symbolic links point to the current working version of japan, and running postpan with these links unchanged could delete or replace files, upload unnecessary plots to the web, and cause a lot of headaches for the WAC. So don't skip these steps!

Getting the missing files

Copy the following missing files and directories to your prex-prompt/postpan directory from the ~/PREX/prompt/postpan directory. Do NOT try to save time by deleting and replacing your entire postpan directory. Git tracking will be all messed up!

Example: cp ~/PREX/prompt/postpan/redana ~/my_dir/prompt/prex-prompt/postpan

  1. conf/
  2. scripts/
  3. src/
  4. redana
  6. RedDict_rdict.pcm
  7. rootlogon.C
  8. Also copy device_list.h from the ~/PREX/prompt/postpan/rootmacros directory to your prex-prompt/postpan/rootmacros directory

Fixing the symbolic links

You will see several symbolic links (the ones in cyan color) inside the prex-prompt directory.

  1. Remove the current symbolic links
    • Example: rm Aggregator -i
    • PROCEED WITH CAUTION: Typing rm Aggregator/ -i (with a slash '/' ) will delete EVERYTHING in the actual Aggregator folder. Please be careful, because autocomplete will put a slash - no slashes allowed!
    1. Aggregator
    2. BMODextractor
    3. hallaweb_online
    4. japanOutput
    5. LogFiles
    6. LRBOutput
    7. results
    8. SummaryPlots
    9. SummaryText
    10. results in the postpan directory
    • You will be asked if you want to delete the symbolic link. Type y for yes.
  2. Create new directories
    • This is what your new output file directory /aonl2/work1/my_directory is for
    • Create directories in this folder with the same names as the links that you just removed from your prex-prompt, EXCEPT japanOutput
    • Example: mkdir /aonl2/work1/<my_directory>/Aggregator
  3. Create new symbolic links pointing to the new directories you just made
    1. Go into the directory you want to create the link in
      • cd ~/my_directory/prompt/prex-postpan/
    2. Create a new symbolic link that points to your own personal folder
      • Example: ln -s /aonl2/work1/<my_directory>/Aggregator Aggregator
    3. We want to use the already-made japan 'pass1' root files so we don't have to re-run them. Point japanOutput to:
      • ln -s /chafs2/work1/apar/japanOutput japanOutput </code>

Running the Code

At last, you are ready to run!

  1. Go into your prex-prompt directory: <code cd ~/my_directory/prompt/prex-prompt/ </code>
  2. Source ROOT Version 6: source reset_env.csh
  3. Change the dependent and independent variables for the regression analysis, and add any additional cuts
    • These can be found in prex-prompt/postpan/conf/combo_reg.conf
    • Change variables: dv are the dependent varibles and iv are the independent variables
    • Add your own custom cuts
  4. Run postpan
    • ./ <run_number>

Where is the output?

Running postpan will generate 2 ouput files that will be saved in the results directory.

  1. prexPrompt_<run_number>_postpan_summary.txt
    • Raw and corrected means and RMSs of your dependent variables
    • Raw mean and RMS of your independent variables
    • Lists these statistics for the entire run as well as separate mini-runs
  2. prexPrompt_<run_number>_regress_postpan.root
  • To run prompt-analysis

Go to the prex-prompt directory and do,

./ <run_number>
  • Making summary plots for single run
./ <run_number>
  • For list of runs, make a list of runs in a file and do,
./ <runlist_filename>

This will analyse and plot the run number that you gave. Your plots will be saved in "SummaryPlots" folder and text file will be saved at "SummaryText" folder. The root file will be saved in "japanOutput" folder.

  • script uploads plots and text summary to the webpage. So be mindful

when pushing this button.