Difference between revisions of "WAC Notes July 18 2019"

From PREX Wiki
Jump to: navigation, search
m (Pedestal/Calibrations Updates)
m (Slug 8: 50 uA Production - Truncated Swing Shift)
 
(38 intermediate revisions by the same user not shown)
Line 17: Line 17:
 
[[WAC Notes July 17 2019]] << >> [[WAC Notes July 19 2019]]
 
[[WAC Notes July 17 2019]] << >> [[WAC Notes July 19 2019]]
  
== July 18 2019 Owl Shift ==
+
== July 18 2019 all 3 Shifts ==
=== 70 uA production ===
+
=== Slug 5: 70 uA production - Test Swing Shift ===
* Good, Current Ramp (add cut on BCM): 3424
+
Data was recovered from 3424, 3429, and 3430 current ramp runs with better beam current lower limit cut
* 3425
+
* Bad/Current Ramp: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-17/run3424_000/run3424_000_all.pdf 3424] - Aq FB was insufficient as this was a current ramp
* 3426  
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-17/run3425_000/run3425_000_all.pdf 3425]
* 3427
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-17/run3426_000/run3426_000_all.pdf 3426]
* 3427
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-17/run3427_000/run3427_000_all.pdf 3427]
* Good, Current Ramp (add cut on BCM): 3428
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-17/run3428_000/run3428_000_all.pdf 3428]
* Good, Current Ramp (add cut on BCM): 3429
+
* Bad/Current Ramp: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3429_000/run3429_000_all.pdf 3429] - Aq FB was insufficient as this was a current ramp
 +
* Bad/Current Ramp: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3430_000/run3430_000_all.pdf 3430] - Aq FB was insufficient as this was a current ramp
 +
* Calibration: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3431_000/run3431_000_all.pdf 3431]
 +
* Calibration: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3432_000/run3432_000_all.pdf 3432]
  
=== 50 uA Production ===
+
=== Slug 6: 50 uA Production - Stable Owl Shift ===
 
Lots of production, only 1 major problem (lost run 3533 with 9k muls due to blinder fail from EPICs fastlogger and Compton IOC)
 
Lots of production, only 1 major problem (lost run 3533 with 9k muls due to blinder fail from EPICs fastlogger and Compton IOC)
 +
* Calibration: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3433_000/run3433_000_all.pdf 3433]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3434_000/run3434_000_all.pdf 3434]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3435_000/run3435_000_all.pdf 3435]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3436_000/run3436_000_all.pdf 3436]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3437_000/run3437_000_all.pdf 3437]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3438_000/run3438_000_all.pdf 3438]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3439_000/run3439_000_all.pdf 3439]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3440_000/run3440_000_all.pdf 3440]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3441_000/run3441_000_all.pdf 3441]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3442_000/run3442_000_all.pdf 3442]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3443_000/run3443_000_all.pdf 3443]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3447_000/run3447_000_all.pdf 3447]
 +
There is a gap here in run number, as the intervening PQB studies flipped the HWP state without being accounted properly the first time (and the following IHWP out runs are 1 arm only)
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3450_000/run3450_000_all.pdf 3450] - Good after BPM cuts
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3451_000/run3451_000_all.pdf 3451] - Good after BPM cuts
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3452_000/run3452_000_all.pdf 3452] - Good after BPM cuts
  
Run list:
+
=== Slug 7: 50 uA Production - During PQB Beam Studies ===
* 3434
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3444_000/run3444_000_all.pdf 3444]
* 3435
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3445_000/run3445_000_all.pdf 3445]
* 3436
+
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3446_000/run3446_000_all.pdf 3446] - double difference in BCM returns with vengence
* 3437
+
* 3438
+
* 3439
+
* 3440
+
* 3441
+
* 3442
+
* 3443
+
* 3444
+
* 3445
+
  
== Production Run List (status at Midnight, end of 7/18/2019) ==
+
 
 +
=== Slug 8: 50 uA Production - Truncated Swing Shift ===
 +
[https://logbooks.jlab.org/entry/3706319 Caryn changed the IHWP state to IN]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3453_000/run3453_000_all.pdf 3453] - RQ2 tripped off
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3454_000/run3454_000_all.pdf 3454]
 +
* Good: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3455_000/run3455_000_all.pdf 3455]
 +
* Next: access, and PQB to follow at low current, then Moller, then DAQ, then another access for magnets
 +
* Runs 3456 -> are slug 8
 +
 
 +
End of slug 7 -> [https://logbooks.jlab.org/entry/3706448 Removed S0] -> should have a tiny ~1% effect on widths now
  
 
== Non-Production Runs and Bad Runs ==
 
== Non-Production Runs and Bad Runs ==
* Died (blinder needs fixing): 3433
+
* Died (blinder needs fixing): [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3433_000/run3433_000_all.pdf 3433
 +
* Some PQB Calibration: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3448_000/run3448_000_all.pdf 3448] - too short and noisy, and already labelled as calibration.
 +
* No beam: [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3449_000/run3449_000_all.pdf 3449]
 +
* RQ2 dead and PQB commences at low current:
 +
** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3456_000/run3456_000_all.pdf 3456]
 +
** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3457_000/run3457_000_all.pdf 3457]
 +
** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3458_000/run3458_000_all.pdf 3458]
 +
** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3459_000/run3459_000_all.pdf 3459]
 +
** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3460_000/run3460_000_all.pdf 3460]
  
 
== Pedestal/Calibrations Updates ==
 
== Pedestal/Calibrations Updates ==
Line 55: Line 82:
 
* Updating the event cuts to have nominal-15 uA beam current lower cut Starting at run 3456 (now) and also setting specifically for 3 70 uA current ramp runs 3424, 3429, 3430 (suspect Aq, but worth a try)
 
* Updating the event cuts to have nominal-15 uA beam current lower cut Starting at run 3456 (now) and also setting specifically for 3 70 uA current ramp runs 3424, 3429, 3430 (suspect Aq, but worth a try)
 
** 50 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.3456-.map (pending beam...)
 
** 50 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.3456-.map (pending beam...)
 +
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3451_000/run3451_000_all.pdf 3451]: BCM cut fixed, but PQB efforts messed with BPMs too much
 +
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3452_000/run3452_000_all.pdf 3452]: BCM cut fixed, but PQB efforts messed with BPMs too much
 +
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3453_000/run3453_000_all.pdf 3453]: Fixed
 
** 70 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.[3424,3429,3430].map
 
** 70 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.[3424,3429,3430].map
 
** [https://logbooks.jlab.org/entry/3706461 Follow up - cut on current at nominal - 15 uA -> applied to current ramp runs]
 
** [https://logbooks.jlab.org/entry/3706461 Follow up - cut on current at nominal - 15 uA -> applied to current ramp runs]
*** 3424: Cuts out half the prior data... marginal improvements
+
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3424_000/run3424_000_all.pdf 3424]: Cuts out half the prior data... marginal improvements
*** 3429: No effect on anything (since the beam was always at 60-70 anyway)
+
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3429_000/run3429_000_all.pdf 3429]: No effect on anything (since the beam was always at 60-70 anyway)
*** 3430: Cuts out 2/3rds of the prior passing data - fixes regression!
+
*** [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3430_000/run3430_000_all.pdf 3430]: Cuts out 2/3rds of the prior passing data - fixes regression!
 +
 
 +
* Caryn updated the Main Det and SAM pedestals from the current scans, for 50 uA and 70 uA data:
 +
** [https://logbooks.jlab.org/entry/3706483 Here], noted [https://logbooks.jlab.org/entry/3706491 Here]
 +
** New Pedestal Map for 70 uA 3424-3430 => prex_sam_pedestal.3424-3430.map, prex_maindet_pedestal.3424-3430.map
 +
** New Pedestal Map for 50 uA 3456- => prex_sam_pedestal.3456-.map, prex_maindet_pedestal.3456-.map
 +
** Also changed retroactively from 3398- the prex_sam_pedestal.3398-.map to match prex_sam_pedestal.3456-.map 50 uA pedestals
  
 
== Issues ==
 
== Issues ==
 +
* Needed nominal - 15 uA BCM lower limit cut.
 +
* Need BPM stability/burp/holdoff kind of cut to save some strange noise in 3403, 3404, and some PQB runs this afternoon.
 +
* It looks like there is non-symmetry between arms (before RQ2 failed)
  
 
== Other Status Updates ==
 
== Other Status Updates ==
  
 +
* PQB runs in the afternoon need more in depth (BPM cut) analyzing - see [https://logbooks.jlab.org/entry/3706339 notes]
 +
* [https://logbooks.jlab.org/entry/3706448 S0 Removed] - midway through slug 8... but at least we know when (run 3456 is the production run it happens after)
  
[[Category:HOW TO]] [[Category:WAC]]
+
[[Category:WAC]]

Latest revision as of 16:32, 10 October 2019

Documentation
HOW TOs for shift crew
Expert Tools
All Expert Contacts



PREX Main << Weekly Analysis Coordinator << Instructions

WAC Notes July 17 2019 << >> WAC Notes July 19 2019

July 18 2019 all 3 Shifts

Slug 5: 70 uA production - Test Swing Shift

Data was recovered from 3424, 3429, and 3430 current ramp runs with better beam current lower limit cut

  • Bad/Current Ramp: 3424 - Aq FB was insufficient as this was a current ramp
  • Good: 3425
  • Good: 3426
  • Good: 3427
  • Good: 3428
  • Bad/Current Ramp: 3429 - Aq FB was insufficient as this was a current ramp
  • Bad/Current Ramp: 3430 - Aq FB was insufficient as this was a current ramp
  • Calibration: 3431
  • Calibration: 3432

Slug 6: 50 uA Production - Stable Owl Shift

Lots of production, only 1 major problem (lost run 3533 with 9k muls due to blinder fail from EPICs fastlogger and Compton IOC)

There is a gap here in run number, as the intervening PQB studies flipped the HWP state without being accounted properly the first time (and the following IHWP out runs are 1 arm only)

  • Good: 3450 - Good after BPM cuts
  • Good: 3451 - Good after BPM cuts
  • Good: 3452 - Good after BPM cuts

Slug 7: 50 uA Production - During PQB Beam Studies

  • Good: 3444
  • Good: 3445
  • Good: 3446 - double difference in BCM returns with vengence


Slug 8: 50 uA Production - Truncated Swing Shift

Caryn changed the IHWP state to IN

  • Good: 3453 - RQ2 tripped off
  • Good: 3454
  • Good: 3455
  • Next: access, and PQB to follow at low current, then Moller, then DAQ, then another access for magnets
  • Runs 3456 -> are slug 8

End of slug 7 -> Removed S0 -> should have a tiny ~1% effect on widths now

Non-Production Runs and Bad Runs

Pedestal/Calibrations Updates

In order to salvage current ramps and trips on large chunks of data and save time/save the regression/pedestal usefulness:

  • Change the lower limit current cut to be nominal-15 uA (35 for 50 uA, 55 for 70 uA)
  • Updating the event cuts to have nominal-15 uA beam current lower cut Starting at run 3456 (now) and also setting specifically for 3 70 uA current ramp runs 3424, 3429, 3430 (suspect Aq, but worth a try)
    • 50 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.3456-.map (pending beam...)
      • 3451: BCM cut fixed, but PQB efforts messed with BPMs too much
      • 3452: BCM cut fixed, but PQB efforts messed with BPMs too much
      • 3453: Fixed
    • 70 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.[3424,3429,3430].map
    • Follow up - cut on current at nominal - 15 uA -> applied to current ramp runs
      • 3424: Cuts out half the prior data... marginal improvements
      • 3429: No effect on anything (since the beam was always at 60-70 anyway)
      • 3430: Cuts out 2/3rds of the prior passing data - fixes regression!
  • Caryn updated the Main Det and SAM pedestals from the current scans, for 50 uA and 70 uA data:
    • Here, noted Here
    • New Pedestal Map for 70 uA 3424-3430 => prex_sam_pedestal.3424-3430.map, prex_maindet_pedestal.3424-3430.map
    • New Pedestal Map for 50 uA 3456- => prex_sam_pedestal.3456-.map, prex_maindet_pedestal.3456-.map
    • Also changed retroactively from 3398- the prex_sam_pedestal.3398-.map to match prex_sam_pedestal.3456-.map 50 uA pedestals

Issues

  • Needed nominal - 15 uA BCM lower limit cut.
  • Need BPM stability/burp/holdoff kind of cut to save some strange noise in 3403, 3404, and some PQB runs this afternoon.
  • It looks like there is non-symmetry between arms (before RQ2 failed)

Other Status Updates

  • PQB runs in the afternoon need more in depth (BPM cut) analyzing - see notes
  • S0 Removed - midway through slug 8... but at least we know when (run 3456 is the production run it happens after)