WAC Notes July 18 2019
From PREX Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Documentation |
HOW TOs for shift crew |
Expert Tools |
All Expert Contacts |
PREX Main << Weekly Analysis Coordinator << Instructions
WAC Notes July 17 2019 << >> WAC Notes July 19 2019
July 18 2019 all 3 Shifts
Slug 5: 70 uA production
Data was recovered from 3424, 3429, and 3430 current ramp runs with better beam current lower limit cut
Slug 6: 50 uA Production
Lots of production, only 1 major problem (lost run 3533 with 9k muls due to blinder fail from EPICs fastlogger and Compton IOC)
- Good: 3434
- Good: 3435
- Good: 3436
- Good: 3437
- Good: 3438
- Good: 3439
- Good: 3440
- Good: 3441
- Good: 3442
- Good: 3443
Slug 7: 50 uA Production
- Good: 3444
- Good: 3445
- Good: 3446 - double difference in BCM returns with vengence
- Good: 3447
- ???: 3449
- BPMs moving, needs cuts: 3450
- ???: 3451
- ???: 3452
- Good: 3453
- Good: 3454
- Good: 3455 - RQ2 tripped off
Production Run List (status at Midnight, end of 7/18/2019)
Non-Production Runs and Bad Runs
- Died (blinder needs fixing): [https://hallaweb.jlab.org/parity/prex/onlinePlots/summary/2019-07-18/run3433_000/run3433_000_all.pdf 3433
- Some PQB Calibration: 3448 - too short and noisy, and already labelled as calibration.
- RQ2 dead and PQB commences at low current:
Pedestal/Calibrations Updates
In order to salvage current ramps and trips on large chunks of data and save time/save the regression/pedestal usefulness:
- Change the lower limit current cut to be nominal-15 uA (35 for 50 uA, 55 for 70 uA)
- Updating the event cuts to have nominal-15 uA beam current lower cut Starting at run 3456 (now) and also setting specifically for 3 70 uA current ramp runs 3424, 3429, 3430 (suspect Aq, but worth a try)
- 50 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.3456-.map (pending beam...)
- 70 uA: prexCH_beamline_eventcuts.2948-.map -> prexCH_beamline_eventcuts.[3424,3429,3430].map
- Follow up - cut on current at nominal - 15 uA -> applied to current ramp runs
Issues
Other Status Updates
PQB runs need analyzing - see notes