WAC Notes October 30 2019

From PREX Wiki
Revision as of 14:22, 31 October 2019 by Cameronc (Talk | contribs) (→‎Agenda)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Documentation
HOW TOs for shift crew
Expert Tools
All Expert Contacts



PREX Main << Weekly Analysis Coordinator << WAC Notes << Instructions

WAC Notes October 23 2019 << >> WAC Notes November 6 2019

October 23th 2019

Daily Meeting BlueJeans

Agenda

Lets follow up on Tao's summarized spreadsheet https://docs.google.com/spreadsheets/u/1/d/1Y6qR_h4oW4qNmbtdpo2TIX2u_TI5qjRUZIDyEroMfl0/edit#gid=0

And lets look at the updates to RCDB logged here https://github.com/leafybillow/check-list/commit/512908a1a0ba7a1993db7d60c0fde4078b902e48

Issues Done

  • A bunch of runs from the spreadsheet have been investigated
  • Some tools for investigating runs have been developed by Tao and others (in various repositories, should be joined into JAPAN soon)

Issues Pending

  • Update slugs with accurate RCDB/disagreements - https://docs.google.com/spreadsheets/u/1/d/1Y6qR_h4oW4qNmbtdpo2TIX2u_TI5qjRUZIDyEroMfl0/edit#gid=0
    • Tao had sent a github link ([1]) showing changes in the runlists, including some run flags that weren't updated in RCDB.
    • WACs should try to update their runs in RCDB again.
    • We also still need to ensure that all of the runs with RCDB/slowtree mismatches have blinder map files if needed. WACs should add a comment to that sheet for runs that still need to have the blinder forced.
  • Aq failure/large charge asymmetry solution:
    • Weibin and Cameron will use the Aq feedback logs to check if the large Aq runs should be cut due to feedback being off -> run list (see rootfile in /adaqfs/home/apar/weibin/Aq_FB)
  • Paul will make a special setup script on adaq machines to analyze prex2 runs after the data directory move
    • In the meantime, you can use "setenv QW_DATA /adaq2/data1/"

Planned Updates

Event cuts

  • Weibin has surveyed the event cuts (see rootfile in /adaqfs/home/apar/weibin/runcuts)
    • We should fix the "repeated setting" files, or remove them if they don't have other substantive changes. Fixed
    • We should standardize the beam current cut on the normalizing BCM as being 15uA below the nominal beam current.
      • Robert will make a list of the runs that are the transitions between "50uA", "70uA", and "85uA".
    • The stability cut and burp cut settings on BPMs are kind of messy. Should we try to clean them up? Cameron will look particularly at runs 3450-3452 and a few isolated runs.

Pedestals

  • Devi has made log entries on this:
    • We should look at all of the calibration runs/condition changes and make sure that the pedestals calculated accurately reflect the conditions during that time
    • We should make sure that all pedestal changes are well motivated and no calibration runs were neglected
    • We should make sure that early runs aren't missing pedestals that may currently have later run ranges (Due to late application)
  • Robert has made a log entry on identifying pedestal changes across runs http://ace.phys.virginia.edu/HAPPEX/3917

BCM normalizer, systematic control, etc.

  • Cameron has reproduced Catherine's BCM systematics vs. normalizer/Aq BCM, but now with DDs in it too - this lives in a parallel folder to the main slug plots (called PQB)
  • Victoria and W&M students are running with this and making diagnostics about systematic control on Aq
    • They've started by trying to look at the aggregated values, but Kent suggests looking at individual runs or miniruns to look at the noise levels in certain BCMs
  • Devika is working on getting the list of which BCMs were working at which times, and will communicate with Victoria and Zeke

Including Dithering as Production Data

  • Victoria has a list of "blessed slopes" for the whole PREX-II data set. Right now it is in a spreadsheet; she and Paul will discuss how to use this in the respin most easily
  • Victoria will use cuts to investigate how it looks to include the dithering data (that was cut before) as production data
    • They have a set of event-cut choices that work with the prompt analysis, but due to analysis changes that occurred during the run it may not work as-is for the respin

Farm analysis

  • Devi asked about how to get access to the data from the farm. It's on the cache and we'll put some instructions up soon
  • Robert needs some help in getting the webpages set up for the respin. Weibin will work with him

Stuff needed for respin

  • List of runs we want to analyze
  • Adjusted BCM cuts to be 15uA below nominal
  • Fix the pedestal file ranges (and understand big jumps in pedestal values)
  • Any changes in event cuts needed?
  • Dither corrections ready to be done for all runs

Attendance

Cameron, Ryan, Weibin, Devi, Dmitry, Tao

Phone: Victoria, Zeke, Caryn, Robert, Paul K., Kent

Retrieved from "https://prex.jlab.org/wiki/index.php?title=WAC_Notes_October_30_2019&oldid=9097"