Difference between revisions of "Parity feedback HOW-TO"
From PREX Wiki
Jump to navigationJump to searchKent Paschke (talk | contribs) |
|||
| Line 1: | Line 1: | ||
*Parity Feeedback | *Parity Feeedback | ||
**To observe if feedback is running , use [[Runbird]] and for each run verify the PITA voltage is changing every 10sec when beam is on. If it is not changing, then feedback is off and needs to be turned on. | **To observe if feedback is running , use [[Runbird]] and for each run verify the PITA voltage is changing every 10sec when beam is on. If it is not changing, then feedback is off and needs to be turned on. | ||
| − | **Runbird will be open at adaq1 computer | + | **Runbird will be open at adaq1 computer console, where the DAQ is run. |
**To stop/start Parity feedback see [[Parity feedback and Analysis Minder]] | **To stop/start Parity feedback see [[Parity feedback and Analysis Minder]] | ||
Latest revision as of 17:49, 22 July 2019
- Parity Feeedback
- To observe if feedback is running , use Runbird and for each run verify the PITA voltage is changing every 10sec when beam is on. If it is not changing, then feedback is off and needs to be turned on.
- Runbird will be open at adaq1 computer console, where the DAQ is run.
- To stop/start Parity feedback see Parity feedback and Analysis Minder
